CE 15 T
STELDA CE 15 T: Precision Servo-Controlled Automatic Case Erector Machine
Form perfect boxes at 15 cases per minute — servo-accurate, zero manual adjustment, fully automatic.
Built for Lines That Cannot Afford to Stop
The STELDA CE 15 T is a fully automatic case erector machine designed for packaging operations that demand consistent output and minimal operator intervention. Servo-driven from the ground up, it forms corrugated cases to a precise 90-degree square — every cycle, every shift.
Unlike conventional case erectors that rely on mechanical cams and manual changeover wheels, the CE 15 T uses servo motors for both width and length adjustment. Box size changes happen through the HMI — no spanners, no wasted time on the line.
Three things this automatic case erector machine is built around:
- Speed Without Compromise – 15 cases per minute with a high-capacity 100-blank magazine — lines keep moving even during loading.
- Precision Formation – Accurate 90° box erection and perfect bottom flap folding on every cycle.
- Operator-First Design – Interlocked safety doors, low-level sensors, 3D HMI diagnostics, and ergonomic exit conveyor reduce fatigue and downtime.
Detailed Specifications of the STELDA CE 15 T
Feature
Specification
Model
CE 15 T
Mode
BOPP Tape
Working Speed
15 cases / minute
Box Size Range
Min: 200mm (L) × 200mm (W) × 200mm (H)Max: 500mm (L) × 500mm (W) × 500mm (H)
Sealing Method
STELDA 3-inch Taping Head
Magazine Infeed Capacity
Approx. 100 blanks (depending on blank thickness)
Electrical Requirement
3 Phase, 415V, 50 Hz, 3.5 KVA
Air Pressure Requirement
16 CFM, 6 Bar (Dry Air)
Machine Dimensions
3760mm (L) × 1945mm (W) × 1860mm (H)
Machine Standards
Built to Certifiable Standards
The STELDA CE 15 T automatic case erector machine is CE compliant and ISO 9001 certified — meeting international safety and quality benchmarks for industrial packaging equipment. Every machine leaves the Peenya factory tested, calibrated, and documented.
STELDA is an OMAC corporate member, signalling alignment with global open packaging machine architecture standards.
What Makes the STELDA TCP 10 Reliable
Servo-Driven Adjustments
Servo motors handle width and length changeovers quickly and precisely — no manual tools required. Settings are saved to the HMI for repeat jobs.
Servo-Controlled Case Movement
Servo drives regulate case movement throughout the full forming cycle, eliminating jerks and mis-formations that cause rework.
Perfect 90° Box Formation
The CE 15 T consistently erects square, flat-based cases — critical for auto-filling, labelling, and palletisation downstream.
High-Capacity Magazine
Up to 100 case blanks load in one go. Sensors trigger a low-level alert before the magazine empties — no surprise line stops.
3D HMI Visual Diagnostics
Faults are displayed on a 3D machine model on the HMI screen. Operators locate and resolve issues faster than reading error codes on a panel.
Smart MIS Data Download
Production data exports to Excel directly from the HMI — line speed, cycles, and downtime records available without a separate system.
Operator Safety by Design
Electrically interlocked access doors prevent entry during operation. No additional safety cage needed.
Energy-Saving Mode
Built-in power-saving mode reduces consumption during idle periods without a manual shutdown.
Flexible Exit Orientation
Configurable for right-hand or left-hand box exit to suit existing line layouts.
Ergonomic Exit Conveyor
Designed to reduce operator strain during downstream box handling.
What Our Clients Say About the STELDA CE 15 T
Experience the
STELDA CE 15 T
in Action
Contact Us for Pricing and
Custom Solutions
Frequently Asked Questions About the STELDA CE 15 T
1. What is an automatic case erector machine and how does the CE 15 T work?
An automatic case erector machine takes flat-packed corrugated case blanks, opens them, folds the bottom flaps into position, and seals them — ready for product filling. The CE 15 T does this at 15 cases per minute using servo-driven movement and STELDA’s 3-inch BOPP taping head for bottom sealing.
2. How quickly can the CE 15 T change over between different box sizes?
Changeovers are handled through the HMI using servo motors — no manual adjustment tools needed. Saved programs allow operators to switch between pre-set box sizes in minutes. The machine also supports right-hand or left-hand exit configuration to match your line layout.
3. What happens if tape or case blanks run low during production?
The CE 15 T includes low-level sensors on both the tape supply and the case blank magazine. When either approaches the threshold, the machine raises an alert on the HMI before stopping — giving operators time to reload without an unplanned line stop.
